violettebeadle

Asphalt mixer Commutator valve failure is not complex, that is, the conversion is not timely, gas leakage, electromagnetic pilot valve failure and so on, the corresponding reasons and solutions are...

Not only that, if coal as fuel, for the traditional equipment used, in the processing process, can achieve the production accuracy is limited, which directly reduces the production accuracy of the...

.As asphalt production equipment, asphalt mixers consist of mixing systems, drying systems, combustion systems, heat storage, thermal material lifting, vibrating screens, weighing and mixing systems,...

.Iii. control measures of heavy oil combustion system in asphalt mixing station　　How to make asphalt mixing heavy oil combustion more adequate, equipment in the process of use more reasonable,...

　　As road construction is generally in the summer, we use some electronic equipment, we should install lightning rod, lightning arrester and other devices to ensure the normal use of electronic...

From the above content can be seen, it is precisely because of the heating, heat from the hot end of the continuous transfer to the cold end, and which and then passed to the hot end, so that the...

　　C. Dust accumulation 　　Dust from the bottom of the dust collector accumulates to the bottom of the bag, which accelerates the wear of the bag.At this time should check the dust discharge...

2. Bubble atomizationBubble atomization is the injection of compressed air into the nozzle upstream flow of liquid, in the bubble generator to form a liquid bubble flow, it flows through the mixing...

In the course of road construction, it is bound to use asphalt mixer, presumably we will not be unfamiliar with this.In addition to the overall quality of the machine, the selection and use of...

First of all, we should understand the basic structure of asphalt regenerative heat equipment, which includes double drum system, control system, recycling material metering system, heat conduction...

　　When the burner starts, the heavy oil flow should be realized by switching valve, and then the burner control cabinet can be opened to start the burner.If the heavy oil electronic ignition is...