violettebeadle's Profile | DailyStrength

Status:

Mood: Ok

Offline

About Me

Age: 52

Gender: Male

Activity

What are the salient features of asphalt mixing equipment in terms of technology

Posted by: violettebeadle

Posted: 12/09/2018

0

Asphalt mixer Commutator valve failure is not complex, that is, the conversion is not timely, gas leakage, electromagnetic pilot valve failure and so on, the corresponding reasons and solutions are of course different.In order to change the commutative valve is not timely phenomenon, generally because of poor smoothness, spring jammed or damaged, oil or impurities stuck in the sliding part, etc., it is necessary to check the status of the oil mist, lubricating oil viscosity, the need to replace...
What are the different classifications of asphalt mixing stations?

Posted by: violettebeadle

Posted: 12/05/2018

0

Not only that, if coal as fuel, for the traditional equipment used, in the processing process, can achieve the production accuracy is limited, which directly reduces the production accuracy of the mixture.Moreover, the combustion of pulverized coal in asphalt mixing station requires a larger combustion chamber, while the refractory material of the combustion chamber belongs to the fragile device, which needs to be checked and replaced regularly, and the maintenance cost is relatively high.Then,...
Analysis and suggestion on enterprise investment of asphalt mixing station

Posted by: violettebeadle

Posted: 12/05/2018

0

.As asphalt production equipment, asphalt mixers consist of mixing systems, drying systems, combustion systems, heat storage, thermal material lifting, vibrating screens, weighing and mixing systems, asphalt supply systems, powder feeding systems, dust removal systems, finished product silos and control systems.First of all, we should understand the basic structure of asphalt regenerative heat equipment, which includes double drum system, control system, recycling material metering system, heat...
Asphalt Mixing Equipment Accessories how to buy

Posted by: violettebeadle

Posted: 12/02/2018

0

.Iii. control measures of heavy oil combustion system in asphalt mixing station　　How to make asphalt mixing heavy oil combustion more adequate, equipment in the process of use more reasonable, you can take the following measures:　　1. Usage Maintenance measures　　Reasonable selection of fuel.At present, with the rapid rise of diesel prices, the use of heavy oil fuel in the production process of asphalt mixing equipment has been the general trend.When selecting heavy oil as fuel, we...
How to clean the dust filter bag of asphalt mixing station?

Posted by: violettebeadle

Posted: 11/29/2018

0

　　As road construction is generally in the summer, we use some electronic equipment, we should install lightning rod, lightning arrester and other devices to ensure the normal use of electronic equipment.In fact, we can see this stage as a more special period.This is because if it is considered from areas with relatively rapid economic development, it is now being upgraded so that many of the maintenance facilities need to be updated and maintained.Therefore, as far as these areas are...
Control of technical parameters in asphalt mixing station mixed with concrete

Posted by: violettebeadle

Posted: 11/26/2018

0

From the above content can be seen, it is precisely because of the heating, heat from the hot end of the continuous transfer to the cold end, and which and then passed to the hot end, so that the continuous circulation, so as to meet the asphalt mixing station in the process of the relevant requirements, to achieve the requirements of cyclic heating.No matter what type of asphalt mixing station, they are used in the process of admixture concrete, in the dosage, blending methods and mixing time...
Fault and elimination method of dust collector in asphalt mixing station

Posted by: violettebeadle

Posted: 11/23/2018

0

　　C. Dust accumulation 　　Dust from the bottom of the dust collector accumulates to the bottom of the bag, which accelerates the wear of the bag.At this time should check the dust discharge device operation status and check whether there is leakage, and take appropriate measures.　　D. Bag Wear 　　The inside of the cloth bag becomes dirty because the dust into the inside through the cloth bag, which also causes wear and tear on the cloth bag.In addition, if it is found that there is...
Maintenance techniques of asphalt mixing station

Posted by: violettebeadle

Posted: 11/23/2018

0

2. Bubble atomizationBubble atomization is the injection of compressed air into the nozzle upstream flow of liquid, in the bubble generator to form a liquid bubble flow, it flows through the mixing tube to reach the conical convergence section (see photo), at this time the number of bubbles increased, the average diameter of the bubble will increase due to bubble expansion; At the same time, due to the acceleration of bubbles and In the liquid two-phase flow of turbulent pulsation, some bubbles...
A brief talk on how asphalt mixing equipment is the grading and segregation of mixtures

Posted by: violettebeadle

Posted: 11/20/2018

0

In the course of road construction, it is bound to use asphalt mixer, presumably we will not be unfamiliar with this.In addition to the overall quality of the machine, the selection and use of components also play a key role, will affect the construction quality and production costs.The screen in asphalt mixer is used as an example to specify.Highway construction needs to consume a large number of asphalt, gravel, cement, sand and other road building materials, the road surface after a certain...
Type of unit included in asphalt mixing equipment

Posted by: violettebeadle

Posted: 11/17/2018

0

First of all, we should understand the basic structure of asphalt regenerative heat equipment, which includes double drum system, control system, recycling material metering system, heat conduction oil combustion system, asphalt metering pump, cold aggregate batching metering system, filler metering system and many other parts.First of all, to do adequate inspection work, check the contents of each lubrication point of lubricating oil, to ensure that there is enough oil, the hopper inside the...
How to ensure the work of asphalt mixing station safely completed?

Posted by: violettebeadle

Posted: 11/14/2018

0

　　When the burner starts, the heavy oil flow should be realized by switching valve, and then the burner control cabinet can be opened to start the burner.If the heavy oil electronic ignition is not successful, you can convert the way three-way, the use of diesel ignition, ignition success of 2 min, and then converted into heavy oil, so that the operation even if the quality of fuel oil can be ignited.5 If the asphalt material after mixing after the best one hours of downtime, the mixing...
New Friend

Posted by: violettebeadle

Posted: 11/12/2018

violettebeadle became friends with TeamDS.

Journals

View All Journals

Support Groups

No Support Groups