Type of unit included in asphalt mixing equipment

First of all, we should understand the basic structure of asphalt regenerative heat equipment, which includes double drum system, control system, recycling material metering system, heat conduction oil combustion system, asphalt metering pump, cold aggregate batching metering system, filler metering system and many other parts.

First of all, to do adequate inspection work, check the contents of each lubrication point of lubricating oil, to ensure that there is enough oil, the hopper inside the accumulation, to ensure clean, the various motors, electrical appliances, instrumentation instructions, signal systems, such as the working status; and so on.
The second is the adjustment of equipment, such as cylinders in the mixing station, valves and so on, so that it meets the requirements.

The third technical parameter is the work cycle, generally speaking, the productivity of the equipment is determined by the capacity of the mixing cylinder and the working cycle.
Of course, the work cycle is also for intermittent devices, and there is no work cycle for continuous devices.

The second technical parameter to be introduced to you next is the design capacity.
Normally, what we call the design capacity of asphalt mixing plant equipment refers to the capacity of the mixing cylinder, which is, of course, mainly for intermittent equipment.

Asphalt mixing process is bound to produce dust, so the dust collector is also one of the essential equipment, it uses the overall modular design, through the two-stage dust removal to achieve a high dust removal efficiency.
Finally, it is only necessary to add a metering system to form a complete Asphalt Batch Mix Plant mixing equipment.

Asphalt Mixing station is a very practical construction machinery.
Especially in the road construction process, has an irreplaceable role.
Because of its importance, in addition to its own quality to be guaranteed, the use of equipment, maintenance and other work should be carried out normally.
Let's take a look at the daily maintenance requirements of the asphalt mixing station.

The original key is again, so only need to replace the vibrating screen bearings, and reinstall the eccentric block, and then in the start of the vibrating screen, everything is normal, tripping phenomenon no longer appear.

After the tripping problem occurred in the vibrating sieve of the asphalt mixer, we replaced the new thermal relay the first time, but the problem did not be alleviated still exists.
And in the resistance, voltage and other inspection process there is no power generation problem, that is the root of what? After excluding various possibilities, it was finally found that the eccentric block of the vibrating screen of the asphalt mixer was beating very violently.

When the asphalt mixer is in the air running state, its vibrating screen appears tripping phenomenon, and has been unable to start normally.
In order to avoid affecting the construction progress, the asphalt and mixer need to be overhauled in time to avoid serious problems.
Wuxi ya Lu Construction Machinery Co., Ltd. summed up some experience, I hope to help you.

Also, if regular cleaning links, so as not to have concrete residue consolidation, thus affecting the normal operation of asphalt mixing station, while ensuring the cleaning of equipment and its surrounding environment.
It is important to remember that the internal water pressure, such as air compressors, gas storage tanks and filters, is removed in a timely manner to maintain the best working condition.

　　The initial asphalt pavement is dominated by surface treatment of absorbent tar) and asphalt pavement (tarmac stone).
1920 began to gradually develop the use of factory hot mixed heat paving asphalt stick soil pavement.
In 1933, the Shanghai Municipal Works Bureau began to develop the use of cold mixed asphalt mixture technology, and in view of the use of coal tar produced by Shanghai Gas Company, has done a lot of experimental research, has established a cold mixing plant in the new city center area of Jiangwan.
1936 Public Concession Shunde Road asphalt mixture mixing plant and the French concession Lou Home Bay asphalt mixture mixing plant, respectively, the cold well and hot mixing plant mixed stick.
Co-material equipment.
In this way, the asphalt is paved.
Concrete pavement, on the development of the factory mixed hot shop, factory cold mixed cold shop, factory cold mix mixing, factory hot mix mixing, and road mixed asphalt concrete stick materials used to pave the asphalt stick soil pavement.

People are most familiar with the vibrating screen, it is the use of dual motor vibration, can ensure that the entire vibrating screen force average, and has a large sieve area, high efficiency, complete screening and so on.
The second is the extinguishing device, this imported automatic low-noise extinguishing device is a hot oil insulation system, can accurately control the temperature of the material, while improving efficiency while reducing production costs.