darrylcheney1800's Profile | DailyStrength

Status:

Mood: Ok

Offline

About Me

Age: 72

Gender: Male

Activity

Application of PLC in asphalt mixing station

Posted by: darrylcheney1800

Posted: 12/09/2018

0

.The surface of the oil slick on the asphalt surface is because there are more bubbles produced by the emulsification process, and the bubble ruptures and remains on the surface, forming the surface of the oil slick.If the surface of the oil slick is not very thick, stir before use can dissolve, if the latter words need to be added to the appropriate defoamer or slow stirring, etc., can be eliminated.nFrom the above content can be seen, it is precisely because of the heating, heat from the hot...
What steps should I follow to repair the asphalt

Posted by: darrylcheney1800

Posted: 12/02/2018

0

.1. Quality.There is no doubt that the better the quality of the asphalt mixer shaft head fittings, the more fine the work, the higher the sales price, and the brand Merchant's products will be relatively expensive.　　(4) The speed of the feeding belt should be maintained at medium rotational speed when calibrating the productivity, and the range of speed regulation must not exceed the maximum speed of the 20~80%.Secondly, daily inspection.The staff shall inspect each time before the asphalt...
Analysis on competition pattern of asphalt mixer industry

Posted by: darrylcheney1800

Posted: 12/02/2018

0

Security for any device is the focus, asphalt mixer Of course there is no exception, today to share with you is also this knowledge, that is, asphalt mixer safety operation norms, may wish to pay attention to it..In addition, after the completion of the work to clean up the asphalt mixer, and can not have water residue in the cylinder, so as to avoid rust of the barrel and blades.Finally, you should brakes the power outage and lock the switch box to ensure safety.nThe silo of the finished silo...
Influencing factors of equipment in production of asphalt mixing station

Posted by: darrylcheney1800

Posted: 11/29/2018

0

nBecause the asphalt mixing equipment is relatively large, and the structure is also more complex, so before disassembly should be based on the location and the actual situation to develop a practical disassembly plan, and the relevant staff to explain.At the same time, it is necessary to do a good job of inspection of equipment and its parts, to ensure that the equipment's power, water, gas sources, etc. are turned off.Because the asphalt mixing station site situation is complex, in the use of...
How to keep the asphalt mixing station in a stable state?

Posted by: darrylcheney1800

Posted: 11/26/2018

0

According to analysis, China's annual pavement construction projects maintain a high growth rate, it can be said that the current period of rapid rise, which will further promote the demand for asphalt mixing plant, that is to say, its development in the market will be further expanded.Advantages of asphalt storage tank: Large reserves, high oil intake, compared with the direct heat type of new high-efficiency fast asphalt heating tank, more accessories, complex thermal conductivity system,...
Tell me about the cold material supply system at the asphalt mixing station.

Posted by: darrylcheney1800

Posted: 11/26/2018

0

Due to raw materials or the use of methods, asphalt mixer in the usual application process will be more than a certain degree of wear and tear, if not timely control or repair, once with air, rain and other long touch may attack corrosion.If the asphalt mixer parts corrosion is severe, the service life and normal operation of all equipment will be affected.In order to avoid the attack of the above scene, can be used in the manufacture of a contrasting section of the filter, but also can use...
How to determine the material of asphalt mixing equipment?

Posted by: darrylcheney1800

Posted: 11/23/2018

0

As we all know, the work of asphalt mixing stations is often very complex, which also covers a number of different systems.Before has been introduced to you some systems, today will introduce you to the next three systems, namely: hot material lifting system, fuel oil supply system and compressed air supply system.Next, let's take a look at the specific content.For example, driven by its development, various building types involved in the development of materials, materials infrastructure...
Treatment of heavy oil combustion system fault in asphalt mixing station

Posted by: darrylcheney1800

Posted: 11/18/2018

0

In fact, the primary purpose of color design of asphalt mixing equipment should still be in terms of function and safety, especially in the case of harsh construction environment, to ensure safety must be used illuminate contrast strong color, in order to play an appropriate warning role to prevent accidents.First of all, of course, to meet the image requirements of the entire equipment, asphalt mixing equipment Color design should not be limited to a single product or a series of products, but...
How the stirring power of asphalt mixing equipment is accurately measured

Posted by: darrylcheney1800

Posted: 11/15/2018

0

Asphalt mixing equipment Stirring speed is indeed very fast, the corresponding stirring power is certainly very high, but the specific amount must be measured in a certain way, so as to determine the use of asphalt mixing equipment range.There are also many methods to measure the stirring power of asphalt mixing equipment, but the relative error is smaller than that of electric motor reverse torque measurement and strain measurement method.　　From the grounding standard of power supply, if...
Application of PLC in asphalt mixing station

Posted by: darrylcheney1800

Posted: 11/11/2018

0

The drying heating system of asphalt mixing station mainly includes two parts of drying drum and combustion device, among which the drying drum is mainly to complete the drying and heating device of cold and wet aggregate.In order to make cold and wet aggregate in a limited period of time, can be very good to complete the preheating, dehydration drying and heating warming three requirements, not only need to make the aggregate evenly distributed in the drum, but also need to provide it with...
New Friend

Posted by: darrylcheney1800

Posted: 11/09/2018

darrylcheney1800 became friends with TeamDS.

Journals

View All Journals

Support Groups

No Support Groups