How to keep the asphalt mixing station in a stable state?

According to analysis, China's annual pavement construction projects maintain a high growth rate, it can be said that the current period of rapid rise, which will further promote the demand for asphalt mixing plant, that is to say, its development in the market will be further expanded.

Advantages of asphalt storage tank: Large reserves, high oil intake, compared with the direct heat type of new high-efficiency fast asphalt heating tank, more accessories, complex thermal conductivity system, high cost, large oil depots, stations can choose such asphalt storage tanks.

Secondly, the motion and hydraulic system of asphalt mixing station must be normal, and there should be no abnormal sound and vibration, to avoid the appearance of large aggregate and agglomeration inside the equipment, otherwise it is easy to get stuck at the feed mouth of the mixing station or blocked by the arch.
Also a point, asphalt mixing station in the same site, it is not appropriate to choose too many units and a number of manufacturers of pumps, so as not to affect its normal operation.

Construction safety has always been a major issue, we can not let go of any safety hazard.
In particular, the construction site of equipment use problems, asphalt mixing station is a number of prone to fault equipment, strengthen the maintenance of the equipment to ensure the site site safety Construction, improve equipment integrity rate, reduce equipment failure, to ensure the quality of concrete have a role that can not be ignored.

First of all, on the one hand, the selection of conveyor pump in asphalt mixing station, must meet the maximum asphalt pouring requirements and the highest height in the construction unit time, the maximum horizontal distance requirements.
At the same time must have a certain technical and production capacity reserves, balanced production capacity of 1.
2~1.
5 times times the best.

For the limiter, we should periodically check whether there are connection anomalies, different lines and other conditions, these conditions will be related to the asphalt mixing station can be safe operation.
Regular maintenance and inspection of asphalt mixing stations can not only ensure the quality of the project, but also reduce the cost of the project and improve the construction efficiency.

First of all, let's analyze the exhaust gas problems that arise in the production process.
Typically, the main reason for exhaust gas production is that some exhaust gas is generated during asphalt heating and use.
So, in the production process of asphalt mixing station, we can take some measures to solve the problem of exhaust gas pollution, the main measures are: 1, mixing equipment in the use of desulfurization and other process measures; 2, drying system main burner fuel is best to choose diesel oil and make it fully combustion; 3, asphalt heating using heat conduction fuel coil heating exchanger ; 4, mixing imploded causing design for a fully enclosed structure; 5, set up the corresponding exhaust gas recovery device.

Next, let's look at how to solve the problem of noise pollution.
Typically, the main noise of the asphalt mixing station comes from the mechanical noise of the asphalt stirring equipment and the noise of the vehicle entering and leaving.
For this problem, we should strengthen the maintenance of equipment in peacetime to reduce its noise, and can be reasonable layout, planning plant construction and take some necessary measures to achieve the effect of noise reduction.

Working principle of asphalt storage tank:
Asphalt storage tank is a new type of asphalt heating storage equipment developed in combination with the characteristics of traditional heat conduction oil heating Asphalt Batch Mix Plant storage tank and internal heat local rapid asphalt heating tank.
It makes up for the shortage of long heating time and high energy consumption of traditional heat conduction oil heating equipment.
The local heater in the asphalt tank is suitable for transportation, asphalt storage and heating of municipal system.

Asphalt Mixing station Composition is more complex, so in maintenance, should be based on the use of different parts and role of the implementation of classification and maintenance.
Maintenance content can be divided into tank maintenance, rolling system maintenance adjustment, travel limit device adjustment and maintenance, wire rope and pulley maintenance, lifting hopper maintenance, track and rail support maintenance.

However, in view of the current development situation, China's bank has formed a certain scale of related enterprises are not many, and this also contains a lot of foreign enterprises.
However, with the continuous growth of foreign joint ventures, the market competition will continue to intensify, and the customer base is also maturing, in the future, China's asphalt mixing station market competition will take on a new form.

On the one hand, is some excellent enterprises in the continuous strengthening of their own level of strength, on the other hand, small and medium-sized enterprises are also constantly catching up, through continuous accumulation and development, China's product quality and foreign-funded brand gap is decreasing.
However, there are still a considerable number of production enterprises hovering in the low-end areas of asphalt mixing stations, although the price is relatively low, but the quality of these products is not reliable, and it is difficult to form a certain scale.