Treatment of heavy oil combustion system fault in asphalt mixing station

In fact, the primary purpose of color design of asphalt mixing equipment should still be in terms of function and safety, especially in the case of harsh construction environment, to ensure safety must be used illuminate contrast strong color, in order to play an appropriate warning role to prevent accidents.

First of all, of course, to meet the image requirements of the entire equipment, asphalt mixing equipment Color design should not be limited to a single product or a series of products, but from the overall, development of the vision to do a comprehensive planning.
Because the structure of each system of asphalt mixing equipment is quite different, so only rely on the appearance of structural design to improve its image, so just use color to make up for this.

Normally, the working object of the asphalt mixing station is asphalt, but if concrete is mixed in it, how can the equipment be controlled? Let's give you a brief explanation of how the asphalt mixing station is operated under special circumstances.

Asphalt mixing equipment Manufacturers in the design of asphalt mixing equipment, in addition to the structure of the equipment, functions, such as the focus, asphalt mixing equipment color design is also considered in the internal, for the satisfaction of all aspects of the requirements.
So, which color does the asphalt mixing equipment use mainly depends on what?

In the construction process of pavement engineering, because of the complicated engineering situation, there are many kinds of problems that may arise.
Among them, asphalt mixing station is the key equipment in this project, therefore, should arouse enough attention.
With regard to the problems that may be encountered in this, today we take a look at what they all have.

For example, one of the most common problems with equipment in the construction process is the yield problem.
Because this problem will directly affect the duration of the project and other aspects of the content, so after analysis found that the asphalt mixing station production instability or inefficiency may have such several reasons, now share to everyone.

3, the discharge temperature is not uniform.
As we all know, the temperature of the discharge will have an important impact on the quality of the use of the material.
If the temperature is too high to live too low, will cause these materials can not be used properly to become waste, not only a serious waste of asphalt mixing station production costs, but also affect its production output.

When the viscosity of heavy oil increases, the oil particles are not easily dispersed into droplets, will produce poor atomization, resulting in burning black smoke.
Therefore, the viscosity of the oil must be controlled.

In the process of using heavy oil, the asphalt mixing equipment appears to burn black smoke, recycled mineral powder blackening, burning flame dimming and hot aggregate flavor phenomenon, and fuel oil consumption is large (the production of 1t finished materials need 7kg heavy oil).
After the production of 3000t finished materials, the imported fuel pressure pump used in it is damaged phenomenon.

1 Asphalt Mixing Stations (hereinafter referred to as mixing stations) used by a unit are used in the production of diesel as fuel.
With the rising price of diesel fuel in the market, the operating cost of the equipment is getting higher and lower, and the efficiency is decreasing.
In order to reduce production costs, it was decided to choose a special combustion oil (short oil) with low price, good combustion performance and meet the requirements to replace diesel as fuel.

Because the working field of asphalt mixing equipment is also different, so the color environment of the concrete construction site of construction machinery products is also one of the considerations to design the color of mixing equipment, in order to play a warning or protection role.

2, fuel combustion value is insufficient.
In order to ensure the quality of construction, therefore, the quality of combustion oil should be selected and used in accordance with the prescribed standards.
Otherwise, if you choose the general burning of diesel oil, heavy diesel or heavy oil, it will seriously affect the heating capacity of the drying cylinder, resulting in low production of asphalt mixing station.

The choice of the blending method can not be sloppy, the demand will be mixed hydrolysis after mixing, not dry mix, once the occurrence of concrete agglomeration can not be used.
At the same time, in order to control its stability, but also to control the amount of water reducer or aeration agent, to ensure that the asphalt mixing station can produce high-quality products.

1, the proportion of raw materials is not reasonable.
Raw materials are the first step in production, if the proportion of raw materials is unreasonable, will affect the subsequent construction of the project, will also cause the construction quality decline and other problems.
The target mix ratio is to control the proportion of sandstone cold material transportation, in the production should be combined with the actual situation to adjust.
If it is found that there is a problem with the co-ordination, reasonable adjustments should be made to ensure the output of the Asphalt Drum Mix Plant mixing station.