Veneer peeling Machine grip quality is the key to the development of enterprises-

.

CNC veneer peeling machine as a kind of large machinery, will be accompanied by improper operation caused by the injury and danger.
Therefore, before use, first of all to check the CNC veneer peeling machine saw blade, whether normal, once the boot, operators must not be near the inspection, so as to avoid danger.
In the operation, the relevant staff to stand on both sides of the machine, can not be lucky and close to the machine itinerary range.
In the process of operation of the machine, the speed and scale of the machine before entering the wood should be strictly adjusted well.
Feeding and picking should be consistent, but the worker's hand must not enter the machine countertop.
At the same time, it should be noted that the machine can not be cleaned in the process of cleaning the pipe mouth, the adjustment of the saw blade to adjust the gear or increase or decrease the secondary mound to complete.

.


Let's briefly explain how veneer peeling machine works:
The wood is placed on the transmission stick, the main motor drives the transmission roller and the pressure roller to rotate the log, and the feed motor through the transmission device so that the push wheel and the log close.
The encoder and the knife bed shift sensor control the cutting motion between the cutter and the log, and with the decrease of the diameter of the log, the tool bed shift sensor controls The feed of the cutter to ensure that the wood skin thin under the chip is consistent.
With the progress of science and technology, digital control technology is also applied to the production of veneer peeling machine machine, in recent years, CNC veneer peeling machine has appeared. CNC Veneer peeling The appearance of machine not only improves the quality and precision of the production of veneer, but also greatly improves the production efficiency and the automation degree of the whole machine.

　　Veneer peeling machine is one of the main equipment for the production of plywood, divided into a card veneer peeling machine cutting machine and a card-free veneer peeling machine, with the advancement of Science and technology digital servo control technology is also used in veneer In the production of Peeling machine machine, CNC veneer peeling machine appeared in recent years.
The appearance of CNC veneer peeling machine not only improves the quality and precision of the production single board, but also greatly improves the production efficiency and the automation degree of the whole machine.
CNC Card-free veneer peeling machine is an important equipment on the Plywood Making Machine production line or veneer production line, mainly used for the use of the card shaft veneer peeling machine rotary cutting the remaining wood core for two times, will be of varying lengths of wood segments, The wood cores in a certain diameter range are cut into veneer of different thicknesses, and the diameter of the rotary cut is small.

.

For any enterprise, we have to get the long-term development must grasp the product quality of this, quality is the key to the development of enterprises, the development of any enterprise must be based on quality to ensure the further development of our enterprise, quality and efficiency is the key to enterprise development, We not only in the case of efficiency is guaranteed to grasp the quality of this, at the same time the quality and efficiency is the key to the development of our enterprises, our enterprises can continue to develop, to reach a new height, in order to become the best in our industry.

.


2. Another factor affecting the increase in tool temperature is the tool itself, that is, the thermal physical properties of the tool material, the structure of the blade or knife body and the shape of the contact surface at work.
When there is a certain amount of heat on the tool surface, the larger the heat conduction coefficient of the tool material, the lower the temperature of the tool surface, the more flat the temperature gradient inside the tool under stable state.
The temperature change is also related to the shape of the tool, the thermal capacity and surface area of the tool material, the smaller the blade wedge angle, the faster the temperature rises, and the faster the cooling.
The properties of the tool surface before and after the cutter are also affected by the temperature of the cutting tool with the factors related to the friction coefficient of the workpiece and the tool.
In addition, the posterior angle decreases, increasing the friction between the tool and the machined surface, saw blade or saw blade sawing is not suitable, will cause a significant increase in the tool temperature.

There are cards veneer peeling machine in the development of the timber industry has played an important role, is an indispensable treatment equipment in the timber industry, to our timber industry has played an important role in the development of the card veneer peeling machine enterprises to achieve good sales, Quality is the key to the development of sky blue Agent Enterprises, we want to achieve good sales, enterprises to get long-term development, we must grasp the quality, quality is the key to the development of our enterprises, is the core of our enterprise, there is a card veneer peeling Machine in order to get long-term development, we must grasp the quality, quality is the key to the development of enterprises.