The Right Choice Of Your Shower Head

The shower is a must in the shower and bath. There are various nozzles connected by a hose to the mixer tap which is massage, vitalize, pulsate, fine rain, etc. Made of ABS, the shower head is retro, modern or standard.

Shower Head: Assembly Effort

In order to enjoy your shower to the fullest, you should have a proper water flow and if possible save some money on your water bill. Before you select your shower head, you need to check your installation:

Check the diameter of the fitting on your shower hose. Usually this diameter is standardized to 1/2 inch;

Pay attention to your shower rod or shower head holder, the housing can be straight or conical;

Set the water flow of your future shower head. Most showers deliver between 12 and 17 liters of water per minute, pleasant water flow, but not very economical. So-called "water-saving" shower heads have recently appeared on the market. They only deliver 6 to 8 liters of water per minute thanks to an air supply system called venturi. The comfort is the same as with a classic shower. Read this to find out more about shower head now.

What are the different shower heads?

There are shower heads in all sizes and shapes, with one or more operating modes and even with light! In short, the selection is huge. Before choosing your shower head, consider the following features so you don't go wrong.

Properties of the shower heads

As we saw above, the diameter of the connections is standardized. It is set to 1/2 inch or a 15 x 21 mm thread. In most cases, the shower hose has a female connection and the shower head has a male connection. The assembly is done by simply screwing and locking with pliers. The seal is guaranteed by a rubber or plastic seal inside the connection. With some very high-quality showers, however, this diameter can differ. In this case, you have no choice but to take a shower head of the same brand when replacing, as it will be difficult to fit a standard shower head.

Flow rate

This is a very important point that should not be neglected! A conventional shower head uses between 12 and 17 liters of water per minute. This is very pleasant because the beam is strong and the diffusion cone is relatively wide.

However, there are also water-saving shower heads . Their average consumption varies between 6 and 8 liters of water per minute. Thanks to a Venturi system that is installed in the shower head, the water is mixed with the ambient air, which limits water consumption and at the same time gives a pleasant feeling of a powerful jet.

Shape and ergonomics

There are shower heads in various shapes and sizes on the market today. Round, square, rectangular, designed but also chrome-plated, transparent, as imitation wood etc. You will find your happiness! The important point is the shape of the holder on your shower rod or shower head holder. It is either round or conical.