Rules and recommendations for floor leveling


Floor finishing often involves having a flat plane that can withstand significant loads. But not all body bases are similar. To eliminate these defects, before installing the final coating, the surface is leveled with special elements and materials.


But only since best self leveling concrete now is easier to use compared to the traditional stuff, does not mean that things can't go wrong. Mixing can be challengingthe window pour correctly before environment is limited, and also the appropriateness of alternatives for distinct surroundings are hard to get . You'll find lots of things that could fail with this home DIY undertaking.


Special features


The alignment of the floors in an apartment or private house is the main step in the preparation of a rough base for decorative finishing.Such a step involves applying a small level of flooring material on the main surface.


lmhou0i.jpg




This technology has a number of advantages:


Possibility of finding the perfect horizontal texture. In some cases, it is also used as a final layer.


Strengthening the structure This is especially important in a room with a large number of people. The additional layer absorbs weight and does not allow the base to collapse quickly.


Floor leveling is a technological operation that depends on many factors:


Curvature of the skin If the base is greatly reduced (2-8 cm), it is recommended to correct this defect. A similar phenomenon often occurs on concrete floors where rough casting is not emphasized.


The most demanding finishing materials for the smoothness of the floor are laminate and parquet, which must be perfectly flat. If the alignment of the surface under the linoleum, then there are no drops so important. The product excludes only large faults that will occur after the disc is installed.


What is the best level?


The floor leveling procedure involves the formation of the top floor, which is placed strictly in the horizontal plane. To get a perfectly smooth base, many experts use levels.


To solve such problems by using various materials. One of the most popular products is wet and dry blends.






Depending on the composition, they can be divided into several subspecies:


Cement, the main component here is cement and sand, which form a solid structure during solidification. Today, a similar solution can be obtained by mixing these products in certain proportions. But it should be understood that factory analogues are better than homemade ones.


This type of smoker's gypsum contains gypsum and fillers. The disadvantage of such products is that they quickly absorb moisture.


Tile adhesive This substance also contains cement. But also polymer plasticizers. As a full-fledged tool for leveling floors, it is used only with the secondary droplets with ceramic tiling at the same time. Independent as it is expensive.


PVA with sawdust, a wood glue mixture, is mainly used for leveling wooden structures. The benefits of the product are simplicity and light weight. You can prepare a similar solution with your own hands.


Polymer formula One of the modern products for floor leveling is a self-leveling solution. They are made on the basis of both cements and various polymers. With the use of these substances is a polyurethane screed.


iPJMXxk.jpg




In residential areas it is used relatively little. This is called 3D-floor, but certain types of such liquid surfaces are not always safe for human health.


Some types of flooring correspond to the use of sheet materials, which are:


Plasterboard The method of plasterboard leveling is used for places where the lowest star base will be established. Special gypsum plaster boards are commonly used as dry flooring. They are on the surface of the expanded soil, which is carefully tamped.


Plywood, a universal material consisting of a thin sheet of wood, the material perfectly perceives the load and is also able to resist moisture. For the surface, moisture-proof plywood is often used.


OSB These products are also produced in the form of sheets made of sawdust. The material is like plywood. But it is rarely used for leveling floors as it can release toxic components into the environment. In this case, the panels are very resistant to moisture, which is an indispensable product for floor placement.


When installing surfaces such as special tools, various mastics, and sometimes metal are used.