Pre-Season Refrigeration Unit Maintenance Guide

Most of the goods that need to be stored in a refrigeration truck body have a very limited shelf life. Particularly during periods of extreme heat, the goods are more prone to decomposition and degradation. Nevertheless, refrigeration devices remain a critical component, which is why refrigerated vehicles are still so prevalent.

The compressor is prone to issues that ultimately lead to the entire refrigeration system being damaged, despite the refrigeration units having an exceptionally long operational longevity. You need to check your body temperature every four hours for this reason in order to guarantee that the temperature reading in the compartment that is being refrigerated is within the established range of plus or minus six degrees Celsius. The temperature may not be within this range for a variety of reasons, and the issue will need to be resolved based on the specific circumstances.

One of the reasons could be that the refrigerator is in the process of defrosting or that it has just finished its defrosting cycle. If this is the case, you may choose to postpone any additional actions until the defrost procedure for the refrigeration unit is finished. At that point, you may conduct an additional check. It is conceivable that the evaporator is obstructed. To defrost the evaporator that is situated on the body in this particular case, you will need to perform a cooling procedure.

Before loading anything onto the refrigeration truck body, you need to double check everything that is required. Ensure that the power system of the transport refrigerated truck, a component of the truck-related system, is functioning properly to ensure that the vehicle can start ordinarily. You need to check that the temperature recorded on the refrigerator truck is accurate in addition to making sure that the compartment is free of any damage, whether internal or external. Maintain the compartment and ceiling section in exceptional condition throughout the completion of this assignment.

The doors also need to be firmly fastened in addition to the ceiling strip being correctly sealed. It is recommended that the refrigerated vehicle be pre-cooled whenever possible. It is advised that the driver activate the temperature monitoring and alarm system, as well as the refrigeration unit, of the truck. The refrigerated compartment door must be closed during the pre-cooling protocol to prevent the refrigeration from being affected by external air and to extend the pre-cooling duration of the transport body compartment..

The refrigeration unit should be deactivated after the refrigerated truck has been pre-cooled to the frigid temperature necessary for transportation. The frozen meat can be promptly loaded onto the truck, and the refrigeration system can be immediately deactivated. At the same time, it is imperative that the loading process be completed in a timely manner to prevent the loss of frigid air.