CNC Veneer peeling machine is our resource saving master

.

The card-free veneer peeling machine consists of the following parts: main drive motor, gearbox, press roller, feed motor, reducer, feed screw, passive roller and knife bed, knife bed shift sensor.

.

Through the above introduction to veneer peeling machine, the vast number of veneer peeling machine users have a more in-depth understanding of veneer peeling machine? It is hoped that the majority of users on the basis of understanding the card-free veneer peeling machine of the card veneer peeling machine has a better application.

.

Speed regulation range 1.00-600.00hz, speed closed-loop control, fast response, high precision, fully meet the late stage of rotary cutting.
Fast feed requirements.
The starting torque at 0Hz can reach 150% rated outputs, ensuring that the motor has a strong cutting force during heavy cutting at low speeds.
Simple structure, low cost, high reliability, simple installation and commissioning, easy operation of workers.

.


1.Veneer peeling machine operators must undergo professional mechanical and basic electrical operation training, good health.
People who drink alcohol, take drugs or similar situations are not allowed to operate, maintain and repair equipment.

Earlier we have described the components of veneer peeling machine, whose main component is its main rotating machine system.
Veneer peeling machine in the use of the process, want to use longer, to veneer peeling machine maintenance is essential, just like the animals we feed, will occasionally get sick.
Therefore, regular maintenance of veneer peeling machine can reduce the number of times it fails, but also extend veneer peeling machine service life.
Therefore, it is essential to maintain the rotating system of veneer peeling machine, and today we will find out how to maintain the veneer peeling machine rotation system.

.

The main drive motor drives the press roller constant speed operation, the passive roller and the knife bed driven by the feed motor, according to the real-time diameter of the log and set the wood skin thickness variable speed operation, the smaller the diameter, the faster the feed motor push the knife bed speed, to ensure that the spinning veneer thickness is uniform.

.


5. When the operator needs to leave veneer peeling machine midway, be sure to cut off the power supply and then leave, the spirit of the operation should be concentrated, must wear protective supplies.

.


2.Veneer peeling machine before use, the operator should check whether all the safety equipment is working properly, and check whether the equipment is defective, before the equipment starts, should ensure that all parts are installed correctly, no parts damaged, the electrical operation keys and functions know clearly, familiar with the use of the steps, All equipment unrelated to the device should be removed from the device.
At the same time start the veneer peeling machine machine before you check whether the handle is in the correct position, and check whether the belt and chain tightness is appropriate.

.


2, familiar with veneer peeling machine main rotation chain structure and performance parameters, strictly prohibit the use of super performance.
If found in the use of different, should immediately stop to check troubleshooting.

.


The above is the maintenance method of veneer peeling machine rotation system, if you want to understand veneer peeling machine maintenance methods, you can visit our modern Machinery Factory website to view!

Veneer peeling machine is an important mechanical equipment for wood plants, plate factories and furniture processing plants.
Correct and safe operation of veneer peeling machine can not only improve the efficiency of veneer peeling machine, but also reduce its failure rate and prolong its service life.
So we have to master the correct veneer peeling machine operation methods and matters needing attention.
Professional veneer peeling machine manufacturers to introduce us to its operating methods and matters needing attention.

.


4, the use of the spindle system with transmission, it is necessary to regularly observe and adjust the veneer peeling machine spindle drive belt loosening degree, to prevent the phenomenon caused by belt skidding.

Veneer peeling machine is mainly divided into cards veneer peeling machine, card-free veneer peeling machine, mainly to the wood processing, used to the log along the direction of the arc, spinning into a uniform thickness of the whole single Board, As a raw material for the manufacture of plywood or multilayer panels.
Here's a look at the principle of the detailed work of the card-free veneer peeling machine.
Hope to let the vast number of veneer peeling machine users to veneer peeling machine have a more in-depth understanding.

.

Advantages according to the test data of the knife and bed shift sensor, the feed speed of the knife bed is calculated in real time, the thickness of the spinning wood is uniform, the precision is high, and the surface is smooth.
Cutting thickness can be set continuously, 0.01 degree error, to meet the needs of different specifications.