Aluminium Ute Canopy, Trays & Tool Boxes Melbourne
However, if you’re camping with your family, you want to make sure the canopy is large enough to fit everyone. Also, consider that the larger the canopy, the more it’s likely to weigh. At HSP, we constantly push the boundaries to create 4×4 auto parts and accessories that are truly awesome.
In addition to this, the Centurion Canopy doors are made up of one aluminium panel which have no external rivets. Every Centurion Canopy is model specific and has been designed to match the contours and profile of the vehicle. The Utemaster Centurion caravan generator box Canopy features full-width doors that give you access to your gear the whole way down each side. There is no obstruction along the top edge of your tub meaning you can easily reach over and pull your gear out through the side door opening.
Our service truck bodies are made to meet or surpass any application's requirements. Moving with the times we have developed a new light weight tray assembly that allows for the fitment of all our canopy accessories without looking like they have been added after the fact. This Tray Body also allows for the direct fitment of our Canopy to the tray.
Being completely modular, the design allows for future changes the owner wishes to make based on what they want to get out of their tray. Our range includes complete modular 12v solutions, pantries fridge slides, draws, roof racks, spare wheel carriers, jerry can holders and many more. That’s why we always aim to create and sell tonneau covers onlinethat meet, if not exceed, your expectations, while allowing you to save money. Our tonneau coversdo not need to be fitted by a professional installer, saving you time and money. Instead, our tonneau coversand fittingshave been designed with the average handyman in mind. However, we do offer a fitting service at our factory in Kilsyth, Victoria.
You also have a variety of underbody options, including water tanks, toolboxes, and underbody drawers. On top of all this, we also provide a range of vehicle accessories from bullbars to wheel and tyre upgrades, ensuring we can be your best option when it comes to fitting out a fleet of vehicles. All of our service bodies are made to fit utes with dual, extra, or single cabins. Our in-house design team specializes in coming up with a practical and affordable option for tradespeople that combines additional storage with the security and safety of your tools and equipment. With the help of our Service Bodies' additional accessories, you can customize a storage solution to meet any job requirement and choose from three different finish options. Custom Canopies and Toolboxes is an Australian owned business based in the eastern suburbs of Melbourne.
You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law. Added Features – Rather than purchasing a bare cover for your tray, a fibreglass canopy also includes windows, a carpet lined interior, and a battery-powered LED interior light. L&G Chivalry has locations in Melbourne and Sydney, and our ute canopies are also available in Adelaide and other areas around Australia. Found the service, attitude and workmanship totally professional. Products were of a very high standard and the fitting was prompt and done with a high level of care. Finally got to deal with a professional business that has a huge amount of knowledge.
This can be customised to suit any item you want to include and our team can operate to any specifications to deliver the right requirements for you. Our Melbourne team specialises in designing, creating, and installing tray back ute canopies to increase your vehicle’s functionality. Here are some of the benefits you can enjoy when installing a canopy on your ute.
Aussie Tool Boxes is an Australian owned and operated business with over 12 years of experience specialising in the design and manufacture of high-quality aluminium ute, truck, and caravan toolboxes. Fleet Trades' innovative design and build process has created a range of trays, service bodies, canopies and accessories designed with durability and functionality in mind. Ridgeback Service Bodies is a premier ute & truck service body manufacturer for trades vehicles.
The sub floor is fully reinforced which allows you to leave all of your gear inside the ute canopy and simply wind the legs to remove it from your vehicle. Our aluminium canopy is suitable for tradesmen, campers, four wheel drivers, and many more tasks. Aussie Tool Boxes canopies are fabricated from 2mm marine grade tread plate aluminium as standard. You can get in touch with us today by giving us a call or sending a message through our website. With more standard features then any other tray, as well as a huge range of accessories, Spartan Alloy and Steel Ute Trays continue to raise the benchmark of quality and service in the market.
From the premium finish paint and the fittings through to the styling, we pay attention to every aspect of your hard top canopy. The result is a world-class canopy that will turn heads and make you proud no matter where you go. Central locking on all 3 doors integrated with your UTE’s original system. Dave Parker is our Melbourne Branch Manager, one of four people that make up a great team who all share a passion for our product. Dave grew up and lives locally giving him great knowledge of the area and it’s surrounds. And of course we can deck it out with what ever canopy or tool box fit out you need.
All of our Australian made products come with lifetime structural warranty and 2 years warranty on parts (ie. Locks, gas struts and seals). EzToolBox is a leading supplier of high quality alloy canopies and we’re based right here in Melbourne. We can help with all types of models including part-tray, alloy dual cab, extra cab and single cab canopies. When it comes to affordability and manufacturing standards, our company provides the best value so you can invest with total confidence.
Our purpose is to design and build a product that won’t let you down when you need it the most, whether it be on the job site or out in the bush. As we developed our business, we found it was not just trading who needed toolboxes. Campers need canopies, hunters need dog boxes, and a few of us just needed somewhere to put things on our ute. Our product range has continually developed over the past 3 years to be the most extensive toolbox and canopy range in Australia. Bothwellcanopy We are a fast-growing Australian owned and operated company specialized in ute canopies and toolboxes. All of our ute tray designs and products are first sandblasted, then zinc primed, and powder coated.
In addition, the guard will stop the possibility of your animal occupant escaping. A roof vent can also be added to the roof of your canopy for extra circulation. Variants shown with solar and mesh floor and also a simple roof rack.
In addition to this, the Centurion Canopy doors are made up of one aluminium panel which have no external rivets. Every Centurion Canopy is model specific and has been designed to match the contours and profile of the vehicle. The Utemaster Centurion caravan generator box Canopy features full-width doors that give you access to your gear the whole way down each side. There is no obstruction along the top edge of your tub meaning you can easily reach over and pull your gear out through the side door opening.
Our service truck bodies are made to meet or surpass any application's requirements. Moving with the times we have developed a new light weight tray assembly that allows for the fitment of all our canopy accessories without looking like they have been added after the fact. This Tray Body also allows for the direct fitment of our Canopy to the tray.
Being completely modular, the design allows for future changes the owner wishes to make based on what they want to get out of their tray. Our range includes complete modular 12v solutions, pantries fridge slides, draws, roof racks, spare wheel carriers, jerry can holders and many more. That’s why we always aim to create and sell tonneau covers onlinethat meet, if not exceed, your expectations, while allowing you to save money. Our tonneau coversdo not need to be fitted by a professional installer, saving you time and money. Instead, our tonneau coversand fittingshave been designed with the average handyman in mind. However, we do offer a fitting service at our factory in Kilsyth, Victoria.
You also have a variety of underbody options, including water tanks, toolboxes, and underbody drawers. On top of all this, we also provide a range of vehicle accessories from bullbars to wheel and tyre upgrades, ensuring we can be your best option when it comes to fitting out a fleet of vehicles. All of our service bodies are made to fit utes with dual, extra, or single cabins. Our in-house design team specializes in coming up with a practical and affordable option for tradespeople that combines additional storage with the security and safety of your tools and equipment. With the help of our Service Bodies' additional accessories, you can customize a storage solution to meet any job requirement and choose from three different finish options. Custom Canopies and Toolboxes is an Australian owned business based in the eastern suburbs of Melbourne.
You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law. Added Features – Rather than purchasing a bare cover for your tray, a fibreglass canopy also includes windows, a carpet lined interior, and a battery-powered LED interior light. L&G Chivalry has locations in Melbourne and Sydney, and our ute canopies are also available in Adelaide and other areas around Australia. Found the service, attitude and workmanship totally professional. Products were of a very high standard and the fitting was prompt and done with a high level of care. Finally got to deal with a professional business that has a huge amount of knowledge.
This can be customised to suit any item you want to include and our team can operate to any specifications to deliver the right requirements for you. Our Melbourne team specialises in designing, creating, and installing tray back ute canopies to increase your vehicle’s functionality. Here are some of the benefits you can enjoy when installing a canopy on your ute.
Aussie Tool Boxes is an Australian owned and operated business with over 12 years of experience specialising in the design and manufacture of high-quality aluminium ute, truck, and caravan toolboxes. Fleet Trades' innovative design and build process has created a range of trays, service bodies, canopies and accessories designed with durability and functionality in mind. Ridgeback Service Bodies is a premier ute & truck service body manufacturer for trades vehicles.
The sub floor is fully reinforced which allows you to leave all of your gear inside the ute canopy and simply wind the legs to remove it from your vehicle. Our aluminium canopy is suitable for tradesmen, campers, four wheel drivers, and many more tasks. Aussie Tool Boxes canopies are fabricated from 2mm marine grade tread plate aluminium as standard. You can get in touch with us today by giving us a call or sending a message through our website. With more standard features then any other tray, as well as a huge range of accessories, Spartan Alloy and Steel Ute Trays continue to raise the benchmark of quality and service in the market.
From the premium finish paint and the fittings through to the styling, we pay attention to every aspect of your hard top canopy. The result is a world-class canopy that will turn heads and make you proud no matter where you go. Central locking on all 3 doors integrated with your UTE’s original system. Dave Parker is our Melbourne Branch Manager, one of four people that make up a great team who all share a passion for our product. Dave grew up and lives locally giving him great knowledge of the area and it’s surrounds. And of course we can deck it out with what ever canopy or tool box fit out you need.
All of our Australian made products come with lifetime structural warranty and 2 years warranty on parts (ie. Locks, gas struts and seals). EzToolBox is a leading supplier of high quality alloy canopies and we’re based right here in Melbourne. We can help with all types of models including part-tray, alloy dual cab, extra cab and single cab canopies. When it comes to affordability and manufacturing standards, our company provides the best value so you can invest with total confidence.
Our purpose is to design and build a product that won’t let you down when you need it the most, whether it be on the job site or out in the bush. As we developed our business, we found it was not just trading who needed toolboxes. Campers need canopies, hunters need dog boxes, and a few of us just needed somewhere to put things on our ute. Our product range has continually developed over the past 3 years to be the most extensive toolbox and canopy range in Australia. Bothwellcanopy We are a fast-growing Australian owned and operated company specialized in ute canopies and toolboxes. All of our ute tray designs and products are first sandblasted, then zinc primed, and powder coated.
In addition, the guard will stop the possibility of your animal occupant escaping. A roof vent can also be added to the roof of your canopy for extra circulation. Variants shown with solar and mesh floor and also a simple roof rack.
Replies