5 Basic Rules of Using 3D Pen

Technology continues to evolve to answer various needs, including design needs. For 3-dimensional building designs, you don't have to bother making mockups and frames from cardboard anymore!

Are you a 3D designer? Now, you can use the 3D Pen! Have you ever tried it?

For those of you who are interested in using the 3D Pen, you need to know some basic rules for using it. At least, you need to understand the 5 basic rules of using a 3D Pen.

Why is that? 3D Pen is still classified as a new technology so you need to know the ins and outs and how to use it to avoid misunderstandings when using it.

You need to remember, 3D Pen has the following parts:

- Body Pen: the part of the pen body that holds the filament (the basic material of 3D printing).

- Power Indicator & Heating Indicator: electricity indicator and filament heating.

- Pen Nozzle: a pen nozzle that ejects and prints hot filament , to be shaped as designed.

- Speed ​​Controller: filament speed regulator that comes out of the nozzle.

- Temperature Controller: temperature control of the filament that comes out of the nozzle, so you can choose whether you want fast dry or slow dry.

- Electric Port: the part of the power cable that connects the pen to the plug (USB port or conventional port).

- Filament: 3D printing base material. Usually, the filament is made of plastic with a flat and elongated shape.

After knowing the parts of the 3D Pen, pay close attention to the 5 basic rules of using a 3D Pen that you really need to know!

Power Indicator function

The power indicator is used to show the electrical power and the burning of the filament panel. One thing you need to remember is that you should use a 3D pen after the heating indicator on the power indicator stops flashing.

The flashing heating indicator indicates that the 3D pen is charging and heating the filament panel. If you use it in a flashing heating indicator, the printed filament will not be perfect.

How to Install Filament

Here's how to properly install the filament: slowly insert the filament (3D Printing base material) from the filament hole, and press the load filament button. Do not force entry. This is done to get good and precise filament results.

Do a Filament Test

Do a filament test after entering the 3D Pen body by setting the speed controller. Pull back to increase speed, and push forward to reduce speed.

If the filament comes out smoothly, then you can immediately start 3D Printing. When the result is less smooth, then you need to repeat the installation of the filament.

Draw the Basic Fields First

Every 3-dimensional shape must have a strong two-dimensional basis. Do not do 3d printing without providing the basic 2-dimensional structure below.

Drawing 3 dimensions floating in the air will easily damage the filament that comes out of the pen nozzle.

Setting the Filament Temperature

Adjust the filament temperature with the screwdriver on the temperature controller. The trick, you simply rotate clockwise to increase the temperature, and rotate counterclockwise to reduce the temperature.

Well, you understand more and more how to use it, right? This time, don't get me wrong using the 3D Pen.

Hopefully, the above review and 5 basic rules can help you understand the intricacies of using a 3D Pen! Choose the 3D Pen you want and good luck!